Compact 2 by Rinnai
Compact 2 by:
Rinnai Compact 2, The Rinnai Compact 2, a popular choice as the small fire solution. Designed with versatility in mind, this fire can fit where others can't. Sleek modern styling with easy installation.
Stainless steel frame Matt black steel, stainless steel inner
Matt black steel frame Traditional black frame
• Design your own look with a range of framing options
• Impressive 5 kW heat output, can heat up to 78 m²
• 2-speed convection fan
• Fits most existing fireplaces for easy renovation
• Manual controls for easy operation
Inside the appliance on the front right hand side panel
Ember bed and flame burner
Naturally aspirated multi port burner
Rinnai strongly recommends the use of a Rinnai flexiliner flue system. Failure to meet this criteria may result in an unsafe situation. Installation without a flexiliner flue is permissible as long as the chimney is checked for soundness and ability to achieve a good draw. If in doubt install a Rinnai flexiliner flue system.
Flue - Decorative Chimney:
Natural draft double skin flue. Termination—an approved
(installations into a combustible opening):
100 mm cowl must be fitted to all installations.
For new fireplace installations (installations into a combustible opening) a Rinnai zero clearance box and flue kit is a mandatory requirement to meet warranty conditions. Flue dimensions; outer 150 mm, inner 100 mm.
Convection fan tangential 2-speed
½ " BSP male flare
Push button combination control valve
Continuous spark electronic ignition.
Push button to light to pilot and burners (low, medium, and high)
High 20 W, standby 0 W. The electrical connection can exit the appliance from the lower left or right hand side, or from the rear of the heater.
Flame failure thermocouple, overheat switch, fan delay, and power failure protection.
ES: Supplier Declaration of compliance
2 year minimum warranty.
- Compact Stainless Steel LPG 5KW Inbuilt Fire