Suitable for:

• indoor installations only

• mains and low pressure systems

• residential water heating applications only

Not suitable as a pool or spa heater. 

Water quality
Rinnai cylinders are manufactured to suit most NZ council water supplies. However some supplies can have a detrimental effect on the cylinder, its operation and life expectancy.  

Water supplies with a high level of calcium carbonate (hard water) can cause scaling on hot surfaces. We recommend a temperature of no more than 65 °C to minimise scale buildup. Scale reducing or water softening devices should be considered in hard water areas.  The unit is not guaranteed against damage due to scaling.

Anode:

High performance anode fitted

Connections:

Hot and cold water connections ¾ " (20 mm)

Construction:

Inner cylinder: High grade enamel steel 
Outer casing: Galvanised steel

Element:

Long-life Superloy 825 alloy sheathed element. Incorporated into an easily removable outer plate should replacement be necessary.

Maximum operating pressure:

850 kPa

Pressure testing:

To 15 bar

Thermal insulation:

CFC-free polyurethane foam, compliant with MEPS standard

Thermostat:

Robert Shaw 30 A contact thermostat, manually resettable at 85 °C

TPR valve:

Rating of TPR supplied with cylinder— factory set to 850 kPa and 90 °C.

Warranty: 7 Years